Skip Hire - Muck Away - Grab Lorry - Tippers - Aggregates - Free Hardcore Tip

Grab Hire

For the best local Grab Lorry rates call  01243 57 58 59

Recycle Southern run a fleet of four, six and eight wheeler grab lorries, catering for domestic, commercial and construction use.  A simple, cost effective way of removing excavated materials, soil, rubble and green waste, as well as general mixed waste.

 

Grab lorries can hold up to three times the capacity of a standard skip.  Our skilled operatives load the Lorry using their hydraulic grab, saving you considerable time and effort.  

Grab Lorry 8w

With a reach of up to approximately 7.5 metres (depending on vehicle), they’re versatile enough to be able to access awkward spaces, or to extend over walls and fences.  

We can also supply and deliver aggregates and topsoil, with special rates available on our own Type 1 and 6F5 Recycled Aggregate, and screened soil.  Materials supplied can be tipped off, or grabbed out of the lorry into a specific place, for your convenience. 

Our grab lorries are available to hire on an hourly/daily basis, ideal for moving material between sites, or within a large development.

Call our friendly transport operatives who will outline the procedure – from your initial enquiry, to final site clearance, detailing all requirements (such as access).

We will provide a free, no obligation quotation for your consideration.

Book Your Grab ONLINE!

We can accept bookings online for Clean Inert or Hardcore Grab loads only.  If you have material to dispose of which does not fall into these categories, please call the Recycle Southern team on 01243 575859 so that we can advise accordingly.  We can accept most material, but may need more information, or an on-site assessment to ascertain the best disposal route, and offer a bespoke price, specific to your requirements.

For prices and online ordering start by selecting the first part of your postcode area from the following: (If your exact postcode is not listed below then we do not cover that area)

Area 1

PO10  PO18  PO19  PO20  PO21  PO22  BN17  BN18

SELECT

Area 2

PO9  ONLY

SELECT

Area 3

PO2  PO3  PO6  PO7  PO8  PO11  BN16  GU28  GU29

SELECT

Area 4

PO1  PO4  PO5  GU31  GU32  RH20  

SELECT